Q: PPC2EHL Series – “Unknown Device” Appears in Device Manager After Windows Update

Brief Description : After a Windows update, the PPC2EHL series device may show an “Unknown Device” in Device Manager due to missing or incompatible drivers. Solution: Please refer to the attached document for step-by-step instructions to reinstall or update the necessary drivers after a Windows update. Your browser does not support PDF.click here to download

Question 1

AUPS-B20-R11 device from AUPS cannot detect battery information when using the new version of the AP.

Accepted Answer

The unit must be returned and updated using the ICD3 programming fixture. Only after this update can the battery information be read and the device function properly.

Question 2

After Enabling ERP Mode on POCm, the Front OSD Is Not Working and the Battery Is Not Charging When Powered Off

Accepted Answer

Brief Description

WhenERP Modeis enabled in the BIOS, theEmbedded Controller (EC)will shut down thestandby power rail (V12A)to comply with energy-saving standards (EU 2023/826) (Please refer to the attached explanation of the energy-saving regulation EU 2023/826).As a result, the system disables standby power to several components during shutdown.

·Thefront OSD panelloses power and becomes non-functional.

·Thebattery charging circuitstops working, so the battery cannot charge while the system is off.

Your browser does not support PDF.clickhereto download

Solution

To allow the front OSD and battery charging functions to work while the system is off,disable ERP Modein the BIOS:

Power on the system and press the designated key to enter BIOS setup.
Navigate to:Chipset→PCH-IO Configuration→Power Saving Function (ERP)
SetERPtoDisabled.
Save changes and reboot the system.

Question 3

POCm-RPL-Battery capacity display abnormality and charging failure

Accepted Answer

Brief Description

POCm-RPL-Battery capacity display abnormality and charging failure

Solution

Please pressDELorF2to enter the BIOS main menu and check if theMCU firmware versionisV1.1.4 or above.

If the firmware version is lower thanV1.1.4, please contact our technical support team atsupport@ieiworld.comto obtain the latest version.

Question 4

PPC2EHL Series – “Unknown Device” Appears in Device Manager After Windows Update

Accepted Answer

Brief Description:

After a Windows update, the PPC2EHL series device may show an “Unknown Device” in Device Manager due to missing or incompatible drivers.

Solution:Please refer to the attached document for step-by-step instructions to reinstall or update the necessary drivers after a Windows update.

Your browser does not support PDF.clickhereto download

Question 5

ECW-281B-BT Sometimes the SSD cannot be detected

Accepted Answer

Brief Description

Sometimes the SSD cannot be detected

Solution

Please send it back for RMA and executeECN120537

Question 6

PCIE-Q170-R10 - Why is the USB 3.0 device detection unstable when using an external USB device on my PCIE-Q170-R10?

Accepted Answer

Replacing the beads at these positions L34, L35, L36, L37, L49, L50, L51, L52 may help. The specifications are as follows: PLD; PCAQ1210D-050S; 5Ω; SMD; 1.2*1mm; 4PIN; +/-25%; 350mA;; RDC: 150mΩ;; Halogen Free

IEI part number: 30000-002088-HF

Question 7

AFL4-W10-EHL-J1/8G-R11 - When the AFL is mounted on the wall, it does not seem to be parallel to the wall?

Accepted Answer

Please contact IEI RMA to arrange return repair and replacement.

Question 8

WAFER-BT-Sometimes the SSD cannot be detected

Accepted Answer

Brief Description

Sometimes the SSD cannot be detected

Solution

Please send it back for RMA and executeECN120537

Question 9

UPC-F12M1-RPLP - why does UPC-F12M1-RPLP sometimes fail to start up at very low temperatures?

Accepted Answer

Please update the Z791ER11 in the attached file to improve low temperature startup

UPC-F12M1-ADLP%20_Z791ER11.zip

Question 10

PUZZLE-3032-C3558R/8G-R10 - Update BIOS V1.3 to follow AMI security solution.

Accepted Answer

BIOS V1.3 modification:

Update BIOS to follow AMI security solution.

1. Update module 'Ofbd'(follow CVE-2023-39536)

2. Update module 'TCG2'(follow CVE-2023-39537)

PUZZLE-3032_AR13.zip

Question 11

PUZZLE-IN003B - Update BIOS 1.4 to follow AMI security solution

Accepted Answer

BIOS V1.4 modification:Update BIOS to follow AMI security solution.1. Update module 'Ofbd'(follow CVE-2023-39536)2. Update module 'TCG2'(follow CVE-2023-39537)

Puzzle-IN003B_AR14.zip

Question 12

DRPC-W-TGL-U-i3C-R10 – Network adapter not showing in Device Manager

Accepted Answer

Brief Description

On the DRPC-W-TGL-U-i3C-R10 system, the network adapter intermittently disappears from the Device Manager during normal operation. Sometimes it is detected correctly, while at other times it goes missing without warning.

Solution

The issue can be resolved by updating the BIOS to versionSJE1AR14. .https://dls.ieiworld.com/IEIWeb/PDC_APP/PLM/WFP004802-IEI/DRPC-W-TGL-U-R10_SJE1AR14.zip

Question 13

KINO-TGL-U-i7-R11

Accepted Answer

Brief Description

PCIE external card cannot be recognized.

Solution

It may be due to insufficient voltage supply. Please send it back for RMA and execute ECN120977

Question 14

KINO-DH420-R10

Accepted Answer

Brief Description

The POWER LED definition of the motherboard F_PANEL1 is wrong. The power LED light will be on even before the motherboard is powered on. Normally, it should be on only after the motherboard is powered on.

Solution

This will not affect normal operation, if in doubt please send it back for RMA repair and execute ECN119683

Question 15

IMBA-Q170-i2-R10

Accepted Answer

Brief Description

Unable to identify IPMI iRIS-2600

Solution

Please send the motherboard back for RMA repair and execute ECN122026

Question 16

PPC2-ADLP -What thermal solution for M.2 PCIe Gen4 SSDs is included in the PPC2-ADLP accessory kits?

Accepted Answer

Brief Description

What thermal solution for M.2 PCIe Gen4 SSDs is included in the PPC2-ADLP accessory kits?

Solution

We have add M.2 thermal pad to the full rangeof PPC2-ADLP accessories for customers to use

Question 17

The image on the AFL4-W10-RK3568-R10 LCD screen has a minor lag

Accepted Answer

Please refer to the instructions below to change the settings.

Question 18

KINO-DH310-R10 Warning!! Case has been opened!

Accepted Answer

Brief Description

If theBIOS turns on the Case Open DetectionfunctionEnabled, the trigger function will appear Warning!! Case has been opened!

Solution

Enter BIOS first disabled, then restart the device, and set BIOS to enabled again.

1、Disable the case open detection function

2、Enable the case open detection function

Question 19

uIBX-260-EHL encountered a short period of power outage and then restored the power, and the system could not boot normally.

Accepted Answer

Brief Description

uIBX-260-EHL encountered a short period of power outage and then restored the power, and the system could not boot normally.

Solution

Update BIOS&EC can solve the problem.

uIBX-260-EHL-JC-R10-TW_V65PAR11 1.zip

Question 20

PCIE-H810-R10 is not supported in the backplane PCIE x4 slot？

Accepted Answer

Brief Description

Add-on cardin the backplanePCIE x4 slotis not supported！

Solution

xxxARxx ==> For PCIEx4*1(B321AR11)xxxxAPxx ==> For PCIEx1*4(B321AP11)

Remark

*** Attachments ***

PCIE-H810-R10_AP11.zip

Question 21

PCIE-Q470-R10 is not supported RAM DDR-2933？

Accepted Answer

Brief Description

Running Burn-in Test on PCIE-Q470-R10 with RAM DDR-2933 would be freezed or get result of memory error(Error verifying data in RAM)

Solution

Disable EIST function.

Location of EIST in BIOS: BIOS -> Advanced -> CPU Configuration -> EIST

Question 22

KINO-945GSE2-N270-R10 - Display will exchange to LVDS1 when install Vista and Windows 7

Accepted Answer

Brief Description

KINO-945GSE2-N270-R10 display will exchange to LVDS1 when install Vista and Windows 7.

Solution

Please update the custom BIOS (ROM_V0ENMR10).

Question 23

PUZZLE-M901

Accepted Answer

Brief Description

Why I followed the instructions in the manual to enter the default account password but cannot log in to the system?

Solution

For products with serial numbers before SN Q22, please try subtracting 1 (in hexadecimal calculation) from the MAC on the sticker before entering.

Question 24

TANK-860 QGW - Assign com port to VM, How to install driver

Accepted Answer

Brief Description

TANK-860 QGW has 6 com port, when assign to VM OS.

COM1 and COM2 don’t need install driver

COM3 / COM4 / COM5 / COM6 need install driver

Virtualization Station already has driver , you must follow SOP install the COM port driver manually

Solution

Please help follow SOP install the COM port driver manually.

VM_Serial_Ports_Initial_SOP (1).pptx

Question 25

I2C (from EC) - How to test the Read/Write Functions of I2C (from EC) under Windows OS.

Accepted Answer

Brief Description

IEI developed an EAPI Tool and SOP on how to tests the READ/WRITE Functions of the I2C under Windows OS. Please note that this IEI EAPI Tool can only be used with IEI SBC Boards where in the I2C is from the EC IC (not from PCH IC).

Solution

M24C32's 7bit I2C address was from 0x51. Convert to 8bit is 0xA2. (Please refer to Table 3. Device select code)

Examples:

EEPROM M24C32 Read/Write 1 Byte(0x55) to Byte address 0x0001. DevSel is 0xA2(8 bit).

Read :

1. Write first Byte address 0x00 to Function:0x04 Index:0x00.

2. Write second Byte address 0x01 to Function:0x04 Index:0x01.

3. Write '2' to Function:0x01 Index:0x64. Because Byte address is 2 byte.

4. Write '1' to Function:0x01 Index:0x65. Because will read 1 byte.

5. Write 0xA2 to Function:0x01 Index:0x61. (DevSel)

6. Write 0x01 to Function:0x01 Index:0x60.

7. Wait for Function:0x01 Index:0x62 to become 0x80.

8. Read data from Function:0x04 Index:0x00.

Write:

1. Write first Byte address 0x00 to Function:0x04 Index:0x00.

2. Write second Byte address 0x01 to Function:0x04 Index:0x01.

3. Write date 0x55 to Function:0x04 Index:0x02.

4. Write '3' to Function:0x01 Index:0x64. Because Byte address is 2 byte and will write 1 byte.

5. Write '0' to Function:0x01 Index:0x65.

6. Write 0xA2 to Function:0x01 Index:0x61. (DevSel)

7. Write 0x01 to Function:0x01 Index:0x60.

8. Wait for Function:0x01 Index:0x62 to become 0x80.

Remark

Kindly refer to the attached file for the SOP/Documentation of the IEI EAPI Tool.

Your browser does not support PDF.clickhereto download

Question 26

WSB-BT-R10 - ISA Support and Limitations

Accepted Answer

Brief Description

ISA Limitations with Intel Baytrail Chipsets as well as with Intel® Express Chipset which refers to any chipset that includes an Intel® I/O Controller Hub 6, 7, 8, or 9 (ICH6, ICH7, ICH8 and ICH9).

Due to the limitation of Intel Bay Trail processors, the WSB-BT does notsupport the following features:1.) Bus Master Cycles2.) DMA3.) LPC Memory Mapped Transactions4.) IRQ0, IRQ1, IRQ2, IRQ8, IRQ9, IRQ13, IRQ145.) ISA Enable (IE) Bit6.) PnP

Solution

With Intel® Express Chipset which refers to any chipset that includes an Intel® I/O Controller Hub 6, 7, 8, or 9 (ICH6, ICH7, ICH8 and ICH9) and Intel SoC (Intel Baytrail) does not support Native ISA Signal. That is why Motherboards (SBC) with the above Intel Chipsets designed it with PCI-to-ISA or LPC-to-ISA Bridge IC(s) in order for the designed Motherboard can support ISA Cards. However, not all ISA Card/Cards will be support due to the listed features above that ISA Card requires.

BayTrail-ISA support

Question 27

ONEKEY Recovery – Problem for Window updating to Win10 version.

Accepted Answer

Brief Description

Window updating to upgrade Win10 version will cause one key to lose its functionality.

Solution

Remove redundant disk and combine them into disk C.

Onekey

Question 28

IMBA-Q170 with INTEL 7th generation CPU can not install VGA DRIVER

Accepted Answer

Brief Description

IMBA-Q170 with INTEL 7th generation CPU can not install VGA DRIVER

Solution

Igdlh64.inf has to add another instruction to install VGA DRIVER normally.

*** Attachments ***VGA DRIVER

Question 29

MPCIE-UART-KIT02-R10 - COM port disappeared

Accepted Answer

Brief Description

MPCIE-UART-KIT02-R10 COMport disappeared.

Solution

Kindly contact FAE about new drivers also for if IC related info's about to help further.

Remark

Also can contact RMA for hardware defective/update related support for the similar issue.

Question 30

ECW-281B-BTi-J1 / 2GB-R10 - BIOS display temperature question mark on ECW-281B-BTi-J1 / 2GB-R10

Accepted Answer

Brief Description

Bios V1.2 problem

Solution

Please update Bios V1.3 or above version to display the temperature.

https://download.ieiworld.com/

Question 31

IMBA-Q870-i2-R10 - IMBA-Q870-i2-R10 Why some SSD detects randomly and some SSD always fine in SATA-ports?

Accepted Answer

Brief Description

SSD from IEI and Intel should be fine with default BIOS but not for all other SSD which has compatible issue within std BIOS by default.

Solution

The default BIOS may need to fine tuning again with customized BIOS to fix, so please contact FAE's help to get solutions according to your problems.

Remark

IEI team may required the original SSD for fine tuning the BIOS based on requirements.

Question 32

Windows 10 may freeze after installing the Anniversary Update - Updated 8-31-16

Accepted Answer

Brief Description

The system freeze after installing the Anniversary Update.

Solution

Please check Microsoft website link below.

https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-may-freeze-after-installing-the/5a60d75d-120a-4502-873c-8bfec65c82d0?page=1&auth=1

Question 33

IMBA-Q170 – Why IMBA-Q170 series boards will not supporting Plug and Play for VGA?

Accepted Answer

Brief Description

Based on Intel eDP specificationon platform Skylake-S & KabyLake-S, eDP signals are without hot plug detect function support.

Solution

The user has to connect the VGA connector to the monitor before system booting

Remark

VGA output function is supported via the eDP from CPU to VGA converter: Chrontel CH7517.

Question 34

WAFER-BW series can support Brightness control-bar in windows-10?

Accepted Answer

Brief Description

Yes, WAFER-BW series can support brightness control adjustment bar in windows-10

Solution

Kindly ensure the WAFER-BW series boards updated with latest std BIOS version-15 for this.

Remark

Contact FAE for more details.

Question 35

PCIE-Q870-i2-R10 and SPCIE-C2260-i2-R10 - How to update MAC Addresses (LAN1 and LAN2) ?

Accepted Answer

Brief Description

Procedures on how to update MAC Addresses (LAN1 and LAN2) of PCIE-Q870-i2-R10 and SPCIE-C2260-i2-R10.

Solution

1. Firstly, you need to create a DOS-bootable USB-stick.

· Please refer to following link to create your own DOS-bootable USB-stick:http://www.cybernetman.com/kb/index.cfm/fuseaction/home.viewArticles/articleId/162

2. Download and extract the TESTFUN.ZIP to the DOS root directory.

3. Execute 'MAC.BAT' under C: > TESTFUN.

4. Locate and take note of which is MAC1 (LAN1) and MAC2 (LAN2) Addresses on the SBC Boards.

5. Type-in the network number for MAC1: '00187D111111' - and press Enter.

6. Then it will ask to type-in the network number for MAC2: '00187D111112' - and press Enter.

7. The tool will automatically burn both MAC1 and MAC2 network number. When it completes the update it would show 'MAC_CODE PASS'.

Remark

- Customer should carefully check the MAC Address assigned on each LAN Port by checking the sticker attached into the LAN Ports.

- The IEI MAC Code usually starts with 00187Dxxxxxx.

- When typing the MAC Address during the update, if the first 8-digit did not match the MAC Address from the sticker kindly modify/edit the 'mac.ini' file.

* For example: the current mac.ini file has 00187D33 and the MAC Address of the LAN Port was 00187D37.

* Then customer should edit the mac.ini file by changing the text file to '00187D37' and click save.

* Then re-run the mac.bat to update the MAC Addresses.

Question 36

IMBA-Q170-i2-R10 & IMBA-Q170-ECO-R10 are compatible with KABY LAKE or 7th Gen CPU?

Accepted Answer

Solution

BIOS version name for “7thGen CPU and this is dedicated for KABY LAKE Platform” first also this support with SKY LAKE platform CPU as well:

B360AR3X.R01 / B360AR3X.R02

BIOS version name for “6thGen CPU and this dedicated for SKY LAKE Platform” only:

B360AR1X.R01 / B360AR1X.R02

Remark

Plz use skylake CPU in first if your on-board BIOS ver is 1x,then do 'GO ME' method BIOS flash for BIOS_3x perhaps contact FAE if you aren't familiar with this flash method.

Question 37

WAFER-ULT2-i1-C-R11 - RS232 ports can support TTL?

Accepted Answer

Brief Description

WAFER-ULT2-i1 series with RS232 ports can support TTL?

Solution

No, the RS232/COM ports are based on Super_IO chip but not TTL.

Remark

Question 38

IMB-H810-I2-R10 or IMBA-H810 series also a common KB

Accepted Answer

Brief Description

The GUID for each board is embedded with BIOS-coding on behalf of LAN_MAC address.

This is not available to change by user unless they changed by other third-party tool.

Solution

Ensure the right MAC-address and flash with latest BIOS (or) contact FAE about to guide amd use a third party tool to fix.

Remark

This is needed based on customer application PXE-environments, otherwise it will not impact with BIOS performance if any wrong GUID (Globally unique identifier).

Question 39

PCIE-H810 cannot use PCIE x4 add-in card

Accepted Answer

Brief Description

PCIE-H810 cannot use PCIE x4 add-in card

Solution

Please update to BIOS supporting PCIE x4 add-in cardRemark

The updated Windows-10_32bit support normally!

Remark

*** Attachments ***

PCIE-H810-R10_AR11.zip

Question 40

ISMM - ISMM std software under Windows-10_64bit showing error when using with IMBA-Q770-R10?

Accepted Answer

Brief Description

ISMM std software tested with earlier operating systems such as Win-XP/7 with earlier platforms such Intel-Q77 based boards without included recent operating system's packages such as Windows-10_64bit at that time.

Solution

This Error 'side by side configuration is incorrect ...' usually means one of the 'Visual C' runtime libraries is missing from corresponding windows system.In this case, you can try to re-install Visual Studio 2008 (VC++ 9.0) redistributable package from MS-website.https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads

Then, ISMM std ver-1.15(x64 version) supporting under Win-10_64bit without errors.

Remark

The updated Windows-10_32bit support normally!

Question 41

WAFER-BW cannot use PCIE DOM add-in card

Accepted Answer

Brief Description

WAFER-BW cannot use PCIE DOM add-in card

Solution

Please update to BIOS supporting PCIE DOM add-in card

Remark

Fix PCIe dom cannot be detected issue.

*** Attachments ***

ROM_V3ECAM10.zip

Question 42

HYPER-BW - How to use audio function on HYPER-BW?

Accepted Answer

Brief Description

There is no any audio codec IC on the HYPER-BW motherboard, it must to connect with a HDA audio peripheral board AC-KIT-892HD-R10 to provide the audio function.

Solution

HYPER-BW motherboard already supported HDA audio function, and there is a 'J_AUDIO1' connector design for connect to audio peripheral board AC-KIT-892HD-R10.

***Important Remind: ***

Please set the 'jumper J2' as '1-2 short' onAC-KIT-892HD-R10 audio peripheral board, it will set DDVD power as +1.5V to suit with HYPER-BW motherboard's circuit design.

Remark

It tested audio function was working on Windows 7 and Ubuntu 14.04.5 LTS with OS built-in drivers.

Question 43

WAFER-PV-D5252-R11 - Why boot-fail (or) POST code stops at 98 when some USB-devices are plugged?

Accepted Answer

Brief Description

There should be a compatibility issue due to Intel Pine-View CPU with UEFI BIOS which has old USB-drivers in kernel.

Solution

We have been released latest std BIOS ver-26(E338AR26.ROM) with updated kernel driver for USB to support maximum USB devices without problems.

Remark

There won't be any issues for hot-plug or plug&play USB-devices after system boot-up in old BIOS itself.

This latest BIOS flash is needed when using special USB devices, otherwise no needed to flash BIOS!

Question 44

TPM-IN01-R11 - can support Windows-10 operating system?

Accepted Answer

Brief Description

Yes, the on-board chip is common 'TPM device from Infineon' which can work under windows-10.

Solution

The windown-10 has inherently supported this TPM card along with our updated driver which is already within the package of TPM-IN01-R11.

Remark

Driver package file name is '7B000-000538-RS_V1.1'

Question 45

PXE-12S-R11 backplane, plug in PCI-X external card will not start

Accepted Answer

Brief Description

PXE-12S-R11 backplane, plug in PCI-X external card will not start

Solution

The where used version goes into 1 to solve the problem of client external card compatibility.

Remark

Question 46

IMB-H110 with DP-VGA no display

Accepted Answer

Brief Description

IMB-H110 with DP-VGA no display

Solution

The default value of the motherboard LVDS/iDP Selection Swithch is LVDS to be adjusted to iDP monitor.

Remark

Question 47

IMBA-Q870-i2-R10 is has no RAID driver for Windows-XP?

Accepted Answer

Brief Description

No RAID drivers available for Windows-XP to support for our motherboard which is Intel 8 series chipset based and we don’t have it from IEI side.

Solution

Customer can use this Motherboard under Windows-XP without RAID support (or) use add-on card if indeed to use RAID functions for Windows-XP.

Remark

The RAID/RST drivers are available for Windows-XP in Intel 7 series chipset.

Question 48

WAFER-ULT2 or WAFER-ULT not showing display after installing graphics driver?

Accepted Answer

Brief Description

Build-in LVDS-support with Intel Graphics driver always detect LVDS is primary display instead of VGA/HDMI for this Mobile/Embedded products.

Solution

Need to use keyboard short-cut 'Windows-key + P', then arrow keys to see display on VGA/HDMI if LVDS display is not connected by default.

Remark

This is common application limit for Intel_Graphics as soon as installed drivers.

Question 49

WAFER-AL cannot be lit with PANEL

Accepted Answer

Brief Description

WAFER-AL cannot be lit with PANEL

Solution

When the PIN33 has no wiring material, the main board will think that there is no physical connection PANEL, so PIN37, PIN38, PIN39, PIN40 will not have voltage output, PIN33 has wiring corresponding to GND to have voltage output.

Remark

Question 50

WAFER-ULT-i1-C-R1x - What BIOS versions (different names) can be used for this series?

Accepted Answer

Solution

WAFER-ULT~R10 board versions are used BIOS versions from B279AR1x.

WAFER-ULT~R11 and WAFER-ULT2 board versions are using BIOS versions from B336AR1x.

Remark

IEI released PCN (product change notice) about this changes for IEI-partner reference.

Question 51

IMBA-Q870 - Why “MEBX version' is not mentioned in BIOS when history.txt shows “MEBX version' updated?

Accepted Answer

Brief Description

“MEBX version meant Management Engine BIOS Extension” which is different than ME firmware version.

Solution

You can press “Ctrl+P” during POST before boot complete to see this versions in Intel MANAGEMENT ENGINE page in details.

Remark

Ensure corresponding latest BIOS version as mentioned in history.txt file of each BIOS folder.

Question 52

WAFER-LX - Why WAFER-LX with ALi SATA M5283 can't support RAID function?

Accepted Answer

Brief Description

RAID function cannot used on WAFER-LX with ALi SATA M5283.

Solution

It's a limitation of SATA chipset. Please use our new version 'WAFER-LX-R13' with new VIA SATA chipset for this.

Remark

Question 53

WAFER-BT series - Why two different BIOS for WAFER-BT series

Accepted Answer

Brief Description

Which BIOS named to use for WAFER-BT-i1-J19001-R10 and other WAFER-BT boards?

Solution

IEI use different BIOS versions for BT-CPU family like BIOS_SAA8AMxx for “M/D_CPU family” (J/Nxxxx) series boards and BIOS_SAA8AIxx for “I_CPU family” (Exxxx)series CPU boards.

Remark

Question 54

WAFER-BT - brightness control

Accepted Answer

Brief Description

Why is the brightness control bar not working or the light intensity is not changing under LVDS-display?

Solution

The current design of the board is fixed and controlling by Chrontel firmware for LVDS display.

So, we need to update the firmware for changing the brightness value in different fixed level.

Remark

Hardware design change will help to adjust the brightness in BIOS.

Question 55

IMBA-C2060-R20 unalbe to install USB3.0 driver.

Accepted Answer

Brief Description

Motherboardhardwareupgrade

IMBA-C2060-R10-->NEC

IMBA-C2050-R20--->ASMedia

Solution

iEiwebsiteto download

http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=imba-c2060&gid=00001000010000000001&cid=08141335210245676258&id=0B137562079441130373#.VuJy2jEguDE

Remark

*** Attachments ***

USB3.0_ASMedia_IMBA-C2060-R20.zip

Question 56

UIBX-250-BW-N3 could not install Windows 7 from USB-DVD Drive.

Accepted Answer

Brief Description

UIBX-250-BW-N3 (Braswell or Skylate system)

The system could not install Windows 7 from USB-DVD Drive.

1. It has USB 3.0 port only.

2. Windows 7 installation disc do not have USB 3.0 driver.

3. The BIOS has no xHCI settings.

Solution

I.Make a Windows installation USB thumb drive:

https://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

Download Link:http://wudt.codeplex.com/

Please prepare a Windows installer discISO file and a USBthumb drive, follow the steps in the setup dialogs.

II.Update USB3.0 drivers into Windows installation USB thumb drive:

https://downloadcenter.intel.com/download/25476/Windows-7-USB-3-0-Creator-Utility

Please refer to the steps in Installer_Creator_reafme.pdf…

1. Download and unzip the Windows 7 USB 3.0 Creator utility to a temporary folder on the Admin system.

2. Connect the USB device containing the Windows 7 image to the Admin system.

3. Right-click the file Installer_Creator.exe and select Run as administrator.

4. Browse to the root of the USB drive.

5. Click Create Image to begin the creation process.

6. Wait for the process to finish. It can take up to 15 minutes.

III.Install Windows 7 with this USB thumb drive.

Question 57

IMBA-Q870-i2-R10 - Can this support Windows-XP version and available drivers for the same?

Accepted Answer

Brief Description

We provided available drivers package for windows-xp with-in default updated drivers already to support.

Solution

We needed to install the driver in manual selection procedures but not auto-installations from all packages.

For Example for Ethernet port:

Select manual driver option and find folder path from “PCIe” as like below to accomplish:

3.LAN WinXP PROEmbSw12 PRO1000 WinXP_Related PCIe

Remark

The over-all system performance will be solver in windows-xp perhaps try to follow the instructions guide from Microsoft windows up to date solutions!

Question 58

IMBA-Q170-i2-R10 - Why Yellow_Marks appears under 'PCI Serial Port' in Windows 7 Device manager!

Accepted Answer

Brief Description

This is due to 'Intel ME' functions needed to update drivers in windows-7(32/64bit) has to be manual installations.

Solution

Ensure update the setup/application files from 'ME driver folder' after updating .NET 4/4.5 in windows.

Select the serial port/communication driver option manually to select under 'manual selection' and then proceed to installations.

Remark

You may get latest ME-driver from supplier websites or contact's IEI's FAE about to find it.

Question 59

WAFER-BT – Why Wafer-BT can’t support HD Resolution LVDS panel well?

Accepted Answer

Brief Description

Driving LVDS panel is based on the Chrontel controller's firmware, and also decided by GPIO_Jumper settings onboard.

Solution

Most types of LVDS panel can be drived well by default firmware, but few can't. So need customized firmware version to match better.

Remark

Contact IEI to get the matched firmware then flash it into your Wafer-BT.

Question 60

WAFER-BT series – Do not fix up BIOS updating between BIOS version -1x and latest BIOS version-2x.

Accepted Answer

Brief Description

Intel CPU hardware versions changes from -R10 to -R20 with BIOS modifications.

Solution

1. Ensure your board hardware version is -R10 or -R20.

Then use BIOS_SAA8Ax1x is for –R10 version onlyandBIOS_SAA8Ax2x for –R20version only.

Don't exchanging the wrong BIOS between this two versions perhaps avoid some failures.

(i.e)WAFER-BT-i1-J19001-R10required to maintain with last std BIOS version “SAA8AM18” and don't update with 'SAA8AM22/future versions' for this -R10 board.

Similarly 'SAA8AM22/future versions' are suitable for 'WAFER-BT-i1-J19001-R20' version and don't used 'SAA8AM18/earlier versions' for this -R20 board.

Question 61

WAFER-board - why BIOS flashing “GO” command is not working related to UEFI?

Accepted Answer

Brief Description

This because ' .NCH file instead of .BAT file for BIOS' in recent board with AMI-UEFI BIOS support UEFI-shell mode, so legacy DOS-mode will not support this access and we strongly recommend to use 'BIOS update under UEFI-mode' as similar.

Solution

1.Enabled UEFI under BOOT in BIOS.

2.Ensure selected UEFI-Bootable DOS-disk with need BIOS folder files, mainly UEFI folder.

3.Type command “fs0:” or 'fs1:' , etc.

4.Locate target BIOS folder files.

5.Execute command “go” as standard method.

6.Wait for till flash complete without interruption.

Question 62

TPM-IN02-R20 – Which Windows Operating System can support for this module?

Accepted Answer

Brief Description

TPM-IN20-R20 is a TPM-2.0 module based on 'TPM solutions fromInfineon' and this cansupport latest windows-XP/7/8 & 10 versions for 32bit/64bit.

Solution

The default driver-package '7B000-000538-RS_V1.1' support most windows-series. The Win-10 has build-in driver, too.

Question 63

IMBA-Q870-i2-R10 - How to use SATA 2TB and storage disks without problems?

Accepted Answer

Brief Description

To avoid some problems while using 2TB/more capacity devices.

Solution

UEFI mode have to be 'ENABLED' under boot-section of BIOS settings when use SATA disk with more than 1TB capacity

Question 64

WAFER-BW-R10 - How to disable LVDS port?

Accepted Answer

Brief Description

Sometimes, when booting into OS and see the black screen even there

is no LVDS panel used. It might display to LVDS port.

Solution

Go to BIOS menu, select 'on board LVDS ' to disable, under Chipset this item.

关于我们威强电简介研发设计威强电集团介绍企业社会责任政策联系我们	产品人工智慧与边缘运算网通嵌入式电脑嵌入式系统平板电脑与显示器电源供应器外设	解决方案 ODM 自主移动机器人电动汽车充电解决方案 AI 人工智能解决方案网通解决方案智慧医疗智慧工厂智慧交通智慧零售智慧建筑	技术支援 EOL 产品技术支援表单 FAQ 安全资讯软件服务保固条款下载专区

购买业务咨询京东旗舰店	资源成功案例型录下载专区视频新闻新闻发布订阅白皮书